Analysis of Occupational Safety and Health Risks in Wharf Structure Rehabilitation Using JSA and HIRARC Methods
DOI:
https://doi.org/10.59261/jequi.v8i4.444Keywords:
Occupational Safety and Health, Job Safety Analysis, hazard identification, risk assessment and risk control, Risk Assessment, Jetty RehabilitationAbstract
Background: Jetty rehabilitation combines overwater work, heavy equipment, suspended loads, demolition, temporary access, and changing marine conditions. These interacting factors create substantial occupational risks and require systematic hazard identification and risk assessment to establish appropriate controls.
Objective: This study identifies task-level hazards using Job Safety Analysis (JSA), classifies the identified risks using Hazard Identification, Risk Assessment and Risk Control (HIRARC), establishes control priorities, and formulates mitigation recommendations for the rehabilitation of Kijing Port Regional II.
Methods: A descriptive case study used a semi-quantitative risk assessment supported by field observations, interviews, and project documents. JSA decomposed the rehabilitation activities and identified hazards; HIRARC then assessed likelihood and severity to determine risk levels and control priorities. Ratings were validated through triangulation, expert judgment, and consistency checks against occupational safety and health requirements and project procedures.
Results: The study identified 32 hazards across eleven work-activity groups. Low, medium, high, and extreme risks accounted for 3.1%, 31.3%, 53.1%, and 12.5%, respectively. High and extreme risks were concentrated in overwater access, lifting and heavy-equipment operations, concrete demolition, and steel pipe pile work.
Conclusion: Sequential JSA-HIRARC analysis linked task-level hazards to risk priorities and activity-specific controls. High and extreme risks require strengthened engineering and administrative controls, supported by appropriate personal protective equipment and continuous supervision.
Downloads
References
Adilla, A., Andre, P., Nofta, E., & Indah, A. (2025). Analysis of Occupational Safety Risks in Construction Projects: A Case Research of the Implementation of JSA and Hierarchy of Control. Devotion: Journal of Research and Community Service, 6(8), 852–865. https://doi.org/10.59188/devotion.v6i8.25514
Alifandy, N., & Astuti, D. (2024). Hubungan antara Kepatuhan Penggunaan Alat Pelindung Diri dengan Risiko Kecelakaan pada Pekerja Fasad. Jurnal Kesmas Asclepius, 6(1). https://doi.org/10.31539/jka.v6i1.9625
Andriana, A., Sety, L. O. M., & Rahman. (2025). Analisis risiko kecelakaan kerja pada proses bongkar muat dengan metode Job Safety Analysis (JSA) di PT. Pelabuhan Nusantara Kendari. Jurnal Kesehatan Dan Keselamatan Kerja Universitas Halu Oleo, 6(3), 232–238. https://doi.org/10.37887/jk3uho.v6i3.156
Aninditya, B., Dinariana, D., & Suryani, F. (2023). Implementation of the Hazard Identification, Risk Assessment and Risk Control (HIRARC) Method on Erection Girder Work of South Japek II Toll Road Construction Project Package 3. Interdisciplinary Journal and Humanity (INJURITY), 2(9), 824–835. https://doi.org/10.58631/injurity.v2i9.127
Aung, T., Liana, S. R., Htet, A., Bhaumik, A., & Scholar, R. (2023). Risk Management in Construction Projects: A Review of Literature. International Journal of Creative Research Thoughts (IJCRT), 11.
Bourahla, A., Fernandes, G., & Ferreira, L. M. D. F. (2024). Managing occupational health and safety risks in construction projects to achieve social sustainability: A review of literature. Procedia Computer Science, 239, 1053–1061. https://doi.org/10.1016/j.procs.2024.06.269
Chan, A. P. C., Guan, J., Choi, T. N. Y., Yang, Y., Wu, G., & Lam, E. (2023). Improving Safety Performance of Construction Workers through Learning from Incidents. International Journal of Environmental Research and Public Health, 20(5). https://doi.org/10.3390/ijerph20054570
Devianti, I. C., Rupiwardani, I., & Susanto, B. H. (2022). Faktor-Faktor yang Mempengaruhi Kepatuhan Penggunaan Alat Pelindung Diri (APD) pada Pekerja Konstruksi di PT ”X”. Banua: Jurnal Kesehatan Lingkungan, 2(2). https://doi.org/10.33860/bjkl.v2i2.1579
Dewi, K. P., Kurniawan, J., Irawan, H., & Purba, H. H. (2022). Risks Identification in Construction of Jetty Projects: Literature Review. Rekayasa Sipil, 11(2), 59–69. https://doi.org/10.22441/jrs.2022.v11.i2.02
Ghasemi, F., Doosti-Irani, A., & Aghaei, H. (2023). Applications, Shortcomings, and New Advances of Job Safety Analysis (JSA): Findings from a Systematic Review. Safety and Health at Work, 14(2), 153–162. https://doi.org/10.1016/j.shaw.2023.03.006
Gonçalves, A., Dutra, A., & Mussi, C. C. (2025). Occupational risks and health and safety management strategies in the port sector: A systematic literature review. Safety Science, 184. https://doi.org/10.1016/j.ssci.2024.106767
I, P. T. P. I. (Persero) R. I. (2025). Rencana Kerja dan Syarat-syarat (RKS): Rehabilitasi struktur Dermaga Jetty 03 Curah Kering Terminal Kijing. PT Pelabuhan Indonesia (Persero) Regional II.
Kaup, M., Łozowicka, D., Baszak, K., Ślączka, W., & Kalbarczyk-Jedynak, A. (2022). Risk Analysis of Seaport Construction Project Execution. Applied Sciences, 12(16). https://doi.org/10.3390/app12168381
Lafhaj, Z., Rebai, S., AlBalkhy, W., Hamdi, O., Mossman, A., & Alves Da Costa, A. (2024). Complexity in Construction Projects: A Literature Review. Buildings, 14(3). https://doi.org/10.3390/buildings14030680
Latifah, H., Awaluddin, A., & Darwis, A. M. (2023). Kepatuhan penggunaan alat pelindung diri pada pekerja di PT Pelabuhan Indonesia (Persero) Regional 4 Makassar. Hasanuddin Journal of Public Health, 4(3), 272–281. https://doi.org/10.30597/hjph.v4i3.26906
Mahapatra, R., & Kushwaha, N. (2020). Hazards Identifications and Risk Assessment in Port Berth Construction: A Case Study. International Journal of Engineering Research & Technology, 9(1), 193–200. https://doi.org/10.17577/IJERTV9IS010097
Rumondor, I., Arungpadang, T. A. R., & Mende, J. (2024). Penerapan metode HIRARC untuk analisis risiko keselamatan kerja pada container crane di Pelabuhan Peti Kemas Bitung. Jurnal Poros Teknik Mesin UNSRAT, 13(1), 60–70. https://doi.org/10.35793/jptmu.v13i1.57193
Wong, C. F., Teo, F. Y., Selvarajoo, A., Tan, O. K., & Lau, S. H. (2022). Hazard Identification Risk Assessment and Risk Control (HIRARC) for Mengkuang Dam Construction. Civil Engineering and Architecture, 10(3), 762–770. https://doi.org/10.13189/cea.2022.100302
Yunanto, R. A., Purnama, A. W., & Lestiani, M. E. (2024). Analisis pengaruh kinerja program keselamatan dan kesehatan kerja (K3) dalam meningkatkan produktivitas kinerja di Pelabuhan Patimban. Jurnal Keselamatan Kesehatan Kerja Dan Lingkungan, 5(2), 111–121. https://doi.org/10.25077/jk3l.5.2.111-121.2024
Yussif, A. M., Taiwo, R., Shakor, P., Han, T., Mohandes, S. R., Antwi-Afari, M. F., Qazi, K., Singh, A. K., Christo, M. S., & Shah, M. A. (2025). A comprehensive literature review on risk identification and assessment in green building construction projects. In Cleaner Engineering and Technology (Vol. 29). https://doi.org/10.1016/j.clet.2025.101089
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Elisabeth Alfaomasi Daeli, Parwadi Moengin
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA). that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
